Unit 1 — Theory of Operation

TM-CAL-005 — Open Handout TM Chapter: Chapter 2 ELOs: Understand how the reference standard generates or maintains its reference value; identify key specifications Estimated time: 20 minutes

Step 1: Read the TM

Open TM-CAL-005. Read Chapter 2 — Theory of Operation completely.

Then come back here.

Chapter 2 Content

2-1. GRID FREQUENCY CONTROL

North American electric utilities regulate grid frequency under NERC Reliability Standard BAL-003. The target is 60.000 Hz; the allowed deviation band is ±0.036 Hz (2.16 rpm at 3600 RPM turbines). The long-term (24-hour) average is maintained to 60.000000 Hz by time error correction procedures: utilities add or subtract generation to return the accumulated cycle count to zero.

For frequency calibration, the long-term average is the reference. A 60-second measurement averages out short-term deviations and provides a reference accurate to ±0.01 Hz (±170 ppm at 60 Hz).

Why Theory Matters for Calibration

You cannot calibrate what you do not understand. Theory tells you: - What the instrument or standard is supposed to do — so you recognize when it is not doing it - What the sources of error are — so you know which ones your calibration procedure addresses - What the limits of the calibration are — so you know when to stop and call it good

If a calibration measurement produces a surprising result, theory is where you look first.

Self-Check Questions

SC1-1. In one sentence, state the operating principle of the AC MAINS FREQUENCY REFERENCE as described in Chapter 2.

SC1-2. What does Chapter 2 identify as the primary source(s) of measurement error or uncertainty?

SC1-3. What key specification(s) (accuracy, range, resolution) does the TM state for this standard?

SC1-4. What safety precaution does §1-3 specify? State it exactly.

SC1-5. What references does §1-2 cite? List at least two.

Answer Key

SC1-1. See TM §2-1. Compare your sentence to the first substantive paragraph of Chapter 2.

SC1-2. See Chapter 2. Look for language about error sources, uncertainty, drift, or limiting factors.

SC1-3. See Chapter 2. Look for numbers with units: %, ppm, Hz, Ω, dB.

SC1-4. See TM §1-3. Copy the safety text exactly.

SC1-5. See TM §1-2. The references list is there.

Checkpoint

Before proceeding, state without looking: - The operating principle of the AC MAINS FREQUENCY REFERENCE - The primary error source(s) - At least one key specification with its value

→ Proceed to Unit 2