▶ View Technical Manual (TM-ANT-036)

HEX LOOP ANTENNA

TECHNICAL DATA SHEET

Document Number: TM-HEX-LOOP-001 Rev A Equipment: HEX LOOP ANTENNA Classification: UNCLASSIFIED — Amateur Radio / Field Use Date: 2026-05-24 Supersedes: None (initial issue)


RECORD OF CHANGES

Change No. Rev Date Description By
1 A 2026-05-24 Initial formatted release M. Martin

Bands: 20M, 15M Approach: Six-sided loop, horizontally polarized Compaction: 0%


CHAPTER 1 — DESCRIPTION

Six-sided loop, horizontally polarized

Special parameters: ~30 ft perimeter 20M, supports broadside directivity


CHAPTER 2 — TECHNICAL CHARACTERISTICS

Parameter Value
Frequency bands 20M, 15M
Feedpoint impedance 50–600Ω
SWR target <2:1
Efficiency 75–95%
Gain 2–12 dBi

CHAPTER 3 — FABRICATION

  1. Fabricate wire radiators per NEC model dimensions
  2. Install tuning elements if applicable
  3. Construct feed network and matching
  4. Measure impedance at feed point
  5. Tune for minimum SWR using dip meter
  6. Test with transmitter (low power initially)
  7. Verify SWR and radiation pattern

CHAPTER 4 — TESTING

Use SWR meter and dip meter to verify resonance and impedance matching.


APPENDIX A — TECHNICAL DATA

See hex_loop_specs.csv for exact specifications.


APPENDIX B — DIAGRAMS

See figures/ folder for antenna layout, circuit schematic, and construction detail.


APPENDIX C — NEC MODEL

See hex_loop.nec for electromagnetic simulation.


Navy Technical Manual Level — Generated with NEC2 modeling

Figures

Hex Loop Antenna Layout
Hex Loop Antenna Layout
Hex Loop Circuit Schematic
Hex Loop Circuit Schematic
Hex Loop Construction Detail
Hex Loop Construction Detail

Downloads